Mini Split/Hvac/Auto AC Repair Complete Tool Kit Vacuum Pump Manifold Gauge Set Hoses and Its Acccessories. 13.4 x 11.5 x 11 inches.A Complete refrigerant changing tool kit for R410a, R134a, R134, R134A, R12, R22, R22A, R404A, R407C or R502. Especially designed for Mini-Split and HVAC system. [Gauge] Blue gauge (low): 2-1/2" diameter, 0-500 PSI; Red gauge (high): 2-1/2" diameter, 0-800 PSI.
Max working pressure: 800PSI, Burst pressure: 4000PSI. [Three Colored Hoses] Brass'Quick Seal' fittings - 45 degree on one end, straight on the other - providing a leak-free seal. Sets of 6 inches long, 1/4 inch yellow, blue, and red hoses; 800 PSI working pressure; 4000 PSI burst pressure. [Vacuum Pump] High performance vacuum pump with high torque design for easy startup and efficient operation and a Die-Cast Aluminum Housing.
Cast aluminum housings make the pumps lightweight, yet durable. Easy to start and maintenance free, the thermally protected motor is durable for long time duty. While a AC system requires 500micron ultimate vacuum, Kozyvacu TA450 delivers better than 150 micron to ensure the vacuum meets your requirements. [Complete Set] Full complete set for Mini-split/ HVAC and AUTO AC refrigerant recharging, includes 1 A pressure gauge set 2 Three colored hoses, with length of 4 ft, Red:1/4''-1/4'' 3 Two ¼ to 5/15 converters 4 1x Can tap, 5 ¼ Flare male to ½ ACME female convert. 6 1 x TA450 Vacuum Pump, 7 One bottle of Vacuum Pump oil.
Kozyvacu is specialized in providing excellent products for your AC repairing tools. We strive to be the industry leader for providing excellent products.
While many AUTO refrigerant changing kits are designed for AUTO AC, even though some of them claim to support Mini-split and HVAC, it could be dangerous such systems to be used for Mini-split. As R410a refrigerant requires higher pressure than an AUTO AC system, (an AUTO AC refrigerant system designed with low-pressure latency), it could be burst when used for Mini-split system. Kozyvacu Mini Split/HVAC/AUTO AC Repair Complete Tool Kit is designed to be a truly complete tool kit that fits both R134a and R410a systems. All the components have been designed and tested for high burst pressure and boast great durability and high performance. Whether applied to commercial or non-commercial uses, this tool kit can do it all!
[Complete Set] A Complete refrigerant changing tool kit for R410a, R134a, R134, R134A, R12, R22, R22A, R404A, R407C or R502. [Three Colored Hoses] Brass'Quick Seal' fittings - 45 degrees on one end, straight on the other - providing a leak-free seal.Sets of 60 inches long, 1/4 inch yellow, blue, and red hoses; 800 PSI working pressure; 4000 PSI burst pressure, Hose ends feature a strong, six-sided crimp that provides a secure, reliable connection between the hose and barb even at maximum pressure. Red and Blue hoses feature one end ¼" connector to connect with gauge and another end at 5/16" to connect R410a system or convert to fit R134a system. The yellow hoses have both ¼ connector to connect gauge and refrigerant can or AC system. [Vacuum Pump] High-performance vacuum pump with high torque design for easy startup and efficient operation and a Die-Cast Aluminum Housing. While an AC system requires 500microns ultimate vacuum, Kozyvacu TA450 delivers better than 150 microns to ensure the vacuum meets your requirements. 6 1 x TA450 Vacuum Pump, 7 One bottle of Vacuum Pump Oil. 2x 1/4 femal flare to 5/16 Maile flare converter (Adapter). 1x 1/2 ACME female to 1/4 Flare male converter(Adapter). A true complete toolkit for Mini-Split/HVAC/AUTO AC recharging. Regardless you are changing refrigerant for your AUTO AC, Mini-Split or HVAC, this tool kit is designed for all purposes.
It includes all of the necessary tools for finishing your task. 1x Manifold for Auto AC/Mini-Split/HVAC. 1x Three Colors Hoses, Burst pressure 4000PSI.
While a AC system requires 500microns ultimate vacuum, Kozyvacu TA450 delivres 150micron and below to make sure that you can reach the vacuum meet your requirement. High torque design for easy startup and efficient operation. A Die-Cast Aluminum Housing - Cast aluminum housings make the pumps lightweight while durable. It is easy to start and maintenance free. Thermally protected motor to make it durable for long time duty.
Oil Drain Valve - Positioned at the bottom of the oil reservoir and angled for faster, more complete draining. Oil Fill Port - Makes adding oil simple since the port is accessible from the front or either side. A free vacuum pump oil is included.High quality manifold and three colored hoses. Aluminum anodized body, two 2-3/4(70mm) gauges with protective boot. Diaphragm-valve mechanism, built-in central sight-glass. 3 color hose with 4000PSI burst pressure.
The can tap thread is designed to fit R134a can and fit for 1/4 hose. Well written instruction to give you a guide line how to connect it to manifold and R134a can correctly. Solid brass build quality that can last for long time. 1/4" Flare to 1/2" ACME for fitting two different refrigerant can or tanks.We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. We are always working hard to ensure your package arrives as soon as possible.
We do not accept P. Please provide a physical address. We try our very best to make sure every customer is completely satisfied.If there's a problem, message us! We're happy to help. This item is in the category "Business & Industrial\HVAC & Refrigeration\HVAC & Refrigeration Tools\HVAC & Refrigeration: Gauges & Probes". The seller is "pnel_0" and is located in this country: US. This item can be shipped to United States.