CravenSpeed 15% Supercharger Reduction Pulley with hub adapter and four bolts. CravenSpeed Quick Puller pulley removal tool to remove your stock supercharger pulley. A Gates Micro-V Serpentine Belt sized for the 15% pulley (K060535). Smaller Pulley = More Go. Smaller SC pulley spins faster.CravenSpeed's supercharger pulleys are machined to a specific reduction of the original equipment on your MINI's supercharger. It is widely accepted that these sizes are safe amount of reduction on this particular supercharger. Smooth, form fitting teeth on your pulley take longer to machine but are worth the extra time. CravenSpeed pulleys will neither eat nor throw your belt. You can be confident your belt will last long, and run quietly. We do recommend using a slightly smaller belt with these reduction pulleys. If both sizes are safe for the supercharger which one should you choose? The supercharger is only creating boost under acceleration, on a normal or even a spirited drive this is only occasional. However, at the track or an autocross event acceleration is sustained and frequent. If you use your MINI for these types of events, it is better to use the 15% reduction pulley. This is because the 17% pulley causes the supercharger to heat more rapidly and the warm air begins to negate the positive effects of the extra PSI earlier in the band. Will it work on my car? This pulley kit will work on all supercharged MINI models except the JCW which already has a similarly reduced size (12%) pulley on the supercharger. If you would like to upgrade a JCW MINI, consider a 17% kit instead.
If you plan on wrenching on your own, make sure you have a puller designed to remove the MINI's press-fit OEM pulley. Gates Serpentine Belt for Reduction Pulley (K060535). If you are adding a reduction pulley, you need a shorter belt.
Length of this belt: 1379mm. This kit ships with the K060535 belt. With this tool, you will be able to remove the stock press fit pulley safely, without removing the tensioner. For use in removing stock supercharger pulley. The puller body is made of heat treated carbon steel and has a tooth profile to match the OEM pulley exactly.
The center screw is grade 8 quality. Our puller will not bend during normal use, and will last for many pulls.
If you would like to remove a JCW pulley, we do offer a tool designed for it specifically. Let us know at checkout and we can make the switch. Only going to use the tool once? Instructions: See the card included in the pulley box for a link to instructions on CravenSpeed's website.California residents for off-road use only. Check your local legal requirements if in a CARB compliant state.
See our other listings for more CravenSpeed and Alta Performance products. The item "CravenSpeed 15% SC Reduction Pulley Kit with Belt & Tool for 2002-2006 MINI R53" is in sale since Thursday, September 22, 2016. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Superchargers & Parts". The seller is "georgeco_specr53" and is located in Mount Airy, Maryland.
This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Viet nam.